When we do the post printing processing of in mold label, we can choose to hot stamp first and then polish, or we can choose to polish first and then hot stamp. Let's make a stamping process analysis of in mold label for us.
Cold stamping process is mainly combined with flexography and embossing. In order to get excellent visual effect of cold stamping, high technical support is needed. If the cold stamping process is used, the author suggests that the method of first cold stamping and then printing should be used. Thick ink layer can be used to hide the burr on the edge of cold stamping, and then excellent printing effect can be obtained.
The effect of hot stamping is affected by foil, temperature, pressure and speed. During hot stamping, the characteristics of the label material in the mold and the suitability of the hot stamping on the foil shall be taken as the premise. The hot stamping pressure shall be adjusted first, and then the hot stamping temperature shall be confirmed. The melting point of the hot melt adhesive coated on the hot stamping foil should be lower than that of the hot melt adhesive of the label material in the mold, and the hot stamping pressure and time should be strictly controlled to avoid the concave convex deformation of the label in the mold. In order to obtain a large area of hot stamping effect, the author does not recommend the selection of hot stamping process.
Its hot stamping can be divided into cold and hot stamping, we need to choose according to our own detailed situation.
Article source: Jiangmen film inner paste manufacturerhttp://www.yidefaze.com
What requirements should Jiangmen pet food container meet
In fact, the plastic bottle of food is just the plastic bottle of packaged food. In terms of the customized food plastic bottle, what requirements should the customized food plastic bottle meet?Convenience: as a container for storing food, it must be convenient for consumers to carry and eat, and have the conditions for long-distance transportation.Corrosion resistance: a large part of food in pla
Key temperature of pet food container in Jiangmen
We all know that food grade plastic bottles need to be heated and cooled in the process of production, especially the good food grade plastic bottles that can be produced only when the temperature in this process must be well controlled. Next, Jiangmen pet food container manufacturer will introduce to us the key temperatures that food plastic bottles need to pass in the process of processing:1. Me
Processing method of Jiangmen pet food container
The rheological property of pet is better in the melting state, and the effect of pressure on viscosity is greater than that of temperature. Therefore, the fluidity of pet is mainly changed by pressure.1. Plastic treatmentBecause pet macromolecules contain aliphatic groups and have certain hydrophilicity, the particles are more active to water at high temperature. When the water content exceeds th
Brief introduction of Jiangmen pet food container
(1) the triangle symbol of "1" on PET bottle indicates that PET bottle is the most widely used beverage bottle. It has high transparency, and others can see the contents at a glance; it is acid and alkali resistant and has a large stomach, so it can hold all kinds of acid juice and carbonated drinks; it has high water resistance and is not easy to exude. If it is only used as a can for low-tempe